Electrical Technician LNP in London, United Kingdom
London, United Kingdom |
£27 - £40.50 per hour |
Contract
Here at TXM we have had a requirement for Electrical technicians working in London North Pole Depot.
A new opportunity has opened for a number of Electrical Technicians for one of the largest Global train Manufactures.
We are looking for individuals from a rolling stock, REME and Aircraft (Avionics) background who hold advanced experience within the field of Electrical and Electronics.
Location: London North Pole Depot
Contract: 1 year rolling
Pay: £27 hourly (Inside ir35) Would need to go Umbrella or PAYE. £40.50 for overtime which is over 50 hours.
Hours: 50 hours Monday - Friday days
Qualification: Level 3 minimum
Start: End of February
Duties could include the following:
• Underframe/IP connector checks checking the wires are connected correctly
• Door interlock switch protection plates (protects it being damaged)
• Header panel pin change not the correct pins put in
• Wifi change out includes fitting and drilling antennas, aerials, data cables and the wifi hub
• Carrying out work recording via both paperwork and computer (SAP)
• Fitting and re-fitting electrical components
• Uploading and downloading software data
• Electrical pinning and de-pinning
• Detailed electrical wiring
• Crimping
• Follow schematics
• Basic fault finding and fluke meter tests
• Implementation of modifications IAW Mod instructions
• Checking of defect reporting systems designed to advise known safety defects or restrictions applicable to the movement of the Train.
• Checking the presence of external equipment and systems connected to the vehicle, or in the path of the vehicle.
• Removing, replacing and fault finding of Rolling Stock components
• Checking the safe condition of passenger and train crew accommodation, for example lighting, heating etc.
• Door systems checks
• Checking Oil levels / Oil Change
• Checking Water levels
• Using a Laptop to run a diagnostics check
• Carry out basic Heating & Ventilation modifications
• Carry out basic seating modifications / Grab rail modifications
• Checking Driver seats / Wiper motors/ Couplers/ Actuators
If you are interested please click to apply or contact Kenny Mcevoy at TXM Recruit.
A new opportunity has opened for a number of Electrical Technicians for one of the largest Global train Manufactures.
We are looking for individuals from a rolling stock, REME and Aircraft (Avionics) background who hold advanced experience within the field of Electrical and Electronics.
Location: London North Pole Depot
Contract: 1 year rolling
Pay: £27 hourly (Inside ir35) Would need to go Umbrella or PAYE. £40.50 for overtime which is over 50 hours.
Hours: 50 hours Monday - Friday days
Qualification: Level 3 minimum
Start: End of February
Duties could include the following:
• Underframe/IP connector checks checking the wires are connected correctly
• Door interlock switch protection plates (protects it being damaged)
• Header panel pin change not the correct pins put in
• Wifi change out includes fitting and drilling antennas, aerials, data cables and the wifi hub
• Carrying out work recording via both paperwork and computer (SAP)
• Fitting and re-fitting electrical components
• Uploading and downloading software data
• Electrical pinning and de-pinning
• Detailed electrical wiring
• Crimping
• Follow schematics
• Basic fault finding and fluke meter tests
• Implementation of modifications IAW Mod instructions
• Checking of defect reporting systems designed to advise known safety defects or restrictions applicable to the movement of the Train.
• Checking the presence of external equipment and systems connected to the vehicle, or in the path of the vehicle.
• Removing, replacing and fault finding of Rolling Stock components
• Checking the safe condition of passenger and train crew accommodation, for example lighting, heating etc.
• Door systems checks
• Checking Oil levels / Oil Change
• Checking Water levels
• Using a Laptop to run a diagnostics check
• Carry out basic Heating & Ventilation modifications
• Carry out basic seating modifications / Grab rail modifications
• Checking Driver seats / Wiper motors/ Couplers/ Actuators
If you are interested please click to apply or contact Kenny Mcevoy at TXM Recruit.
Similar Job Searches
- Electrical Technician LNP
- Electrical Technician LNP in London
- Electrical Technician LNP in Westminster
- Electrical Technician LNP in London
- Electrical Technician LNP in England, United Kingdom
- All jobs in London
- All jobs in Westminster
- All jobs in London
- All jobs in England, United Kingdom
- Electrical
- Technician
- Electrical Technician
- Technician Electrical