Rolling Stock Maintenance Technicians in Ilford, London, United Kingdom
Ilford, London, United Kingdom |
GBP £45000 to £48000 per annum |
Permanent
Job title: Rolling Stock Maintenance Technicians.
Job location:Ilford Seven Kings
Salary:Circa £45kpa + London Allowance + Bupa + Pension
Shifts:4 on 4 off days & nights
Hours per week: 40
Start date:ASAP
Duration:Permanent (will consider long term contractors and Ltd Company)
Rolling Stock:Aventra 720s
Position Summary:
Purpose of the job
Responsible for carrying out planed and corrective maintenance, repair and fault finding on Electric Multiple Units. Take overall responsibility of vehicle examinations in line with vehicle maintenance instructions (VMI's).
Undertake all types of maintenance examination work to ensure that we provide a safe, reliable, and defect free train. Take responsibility for the safe, efficient and professional workmanship of oneself and others under your control.
Undertake 'Designate Person' safety responsibility for applying Depot Protection System and ensure safe systems of work methods are applied.
Key responsibilities
1.Undertake technical maintenance to the required standards, and in accordance with all maintenance instructions.
Responsible for the accuracy and completeness of all maintenance documentation prior to Shift Production Manager (SPM) validation and authorisation.
Responsible to the Shift Production Manager for the accurate identification of outstanding work at the end of the shift.
2. Operation of powered plant, lifting and mechanical handling equipment.
Ensuring all problems with processes, tooling and documentation are identified within the team is reported to the Shift Production Manager / Facility Management Team
3.Highlighting potential Health and Safety concerns
Compliance with all laid down H&S legislation and depot procedures to ensure a safe accident free environment
Responsible for keeping the work area clean and tidy and to the highest standards at all times.
Supporting the SPM regarding delivery of Quality, Waste Reduction, Delivery and H&S targets
4. Produce comprehensive reports on specific fault finding investigations
Identify potential improvements and feedback to Engineering
Constantly searching for ways to improve processes
5. Ability to coach staff in good working practices and quality standards. Supporting the Shift Production Manager in the identification of training needs
Coaching staff in good working practices and quality standards
Job Requirements
Qualifications & Functional Knowledge
Education
*Qualified to level 3 in an Electrical / Mechanical engineering or Electronic Engineering related discipline or equivalent.
Relevant experience required
*Ability to undertake detailed fault finding and analysis by reading and following electrical and pneumatic schematic drawings
*Good knowledge of Electrical & Mechanical Principles
*Computer literate and experience of using a maintenance management system for work recording
If you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to <email address removed> OR call Rob Wilamowski on <phone number removed> .
PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.
Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.
Please note the above job specification could be subject to change as agreed with our client.
Job location:Ilford Seven Kings
Salary:Circa £45kpa + London Allowance + Bupa + Pension
Shifts:4 on 4 off days & nights
Hours per week: 40
Start date:ASAP
Duration:Permanent (will consider long term contractors and Ltd Company)
Rolling Stock:Aventra 720s
Position Summary:
Purpose of the job
Responsible for carrying out planed and corrective maintenance, repair and fault finding on Electric Multiple Units. Take overall responsibility of vehicle examinations in line with vehicle maintenance instructions (VMI's).
Undertake all types of maintenance examination work to ensure that we provide a safe, reliable, and defect free train. Take responsibility for the safe, efficient and professional workmanship of oneself and others under your control.
Undertake 'Designate Person' safety responsibility for applying Depot Protection System and ensure safe systems of work methods are applied.
Key responsibilities
1.Undertake technical maintenance to the required standards, and in accordance with all maintenance instructions.
Responsible for the accuracy and completeness of all maintenance documentation prior to Shift Production Manager (SPM) validation and authorisation.
Responsible to the Shift Production Manager for the accurate identification of outstanding work at the end of the shift.
2. Operation of powered plant, lifting and mechanical handling equipment.
Ensuring all problems with processes, tooling and documentation are identified within the team is reported to the Shift Production Manager / Facility Management Team
3.Highlighting potential Health and Safety concerns
Compliance with all laid down H&S legislation and depot procedures to ensure a safe accident free environment
Responsible for keeping the work area clean and tidy and to the highest standards at all times.
Supporting the SPM regarding delivery of Quality, Waste Reduction, Delivery and H&S targets
4. Produce comprehensive reports on specific fault finding investigations
Identify potential improvements and feedback to Engineering
Constantly searching for ways to improve processes
5. Ability to coach staff in good working practices and quality standards. Supporting the Shift Production Manager in the identification of training needs
Coaching staff in good working practices and quality standards
Job Requirements
Qualifications & Functional Knowledge
Education
*Qualified to level 3 in an Electrical / Mechanical engineering or Electronic Engineering related discipline or equivalent.
Relevant experience required
*Ability to undertake detailed fault finding and analysis by reading and following electrical and pneumatic schematic drawings
*Good knowledge of Electrical & Mechanical Principles
*Computer literate and experience of using a maintenance management system for work recording
If you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to <email address removed> OR call Rob Wilamowski on <phone number removed> .
PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.
Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.
Please note the above job specification could be subject to change as agreed with our client.
Similar Job Searches
- Rolling Stock Maintenance Technicians
- Rolling Stock Maintenance Technicians in Ilford
- Rolling Stock Maintenance Technicians in Redbridge
- Rolling Stock Maintenance Technicians in London
- Rolling Stock Maintenance Technicians in England, United Kingdom
- All jobs in Ilford
- All jobs in Redbridge
- All jobs in London
- All jobs in England, United Kingdom
- Rolling Stock
- Maintenance
- Maintenance Technicians
- Rolling Stock Technicians
- Rolling
- Maintenance Rolling Stock
- Stock
- Rolling Stock Maintenance
- Technicians
- Rolling Maintenance