Signalling Design Verifiers x 2 in York, York, York, United Kingdom
York, York, York, United Kingdom |
salary not specified |
Contract
Job Title: Signalling Design Verifier
Start Date: ASAP
Contract Duration: 6 Months
Location: York
Purpose
Defined responsibilities and requirements for level crossing competent signalling design engineers. This is required to support the development of logic-based level crossings, including MCB, MCB-CCTV, MCB-OD2, AHB, MSL, AOCL.
Outline Responsibilities
- Support the Alstom Engineering Manager to deliver a programme of works to defined budget and timescales.
- Production/verification of level crossing compliance reports and gap analysis.
- Production/verification of interface descriptions based on the level crossing sub-system architecture.
- Participate in HAZID meetings and identify relevant level crossing system and operational hazards.
- Support interfacing sub-system designers with level crossing input/output requirements.
- Production/verification of level crossing wiring and level crossing PLC application logic equations for MCB, MCB-CCTV, MCB-OD2, AHB, MSL, and AOCL type crossings.
- Support RAM engineers with system reliability, availability, and maintenance analysis specific to the level crossing sub-system.
- Input in to design and engineering logs, risk register, non-compliance register, Hazard log, and design assumptions.
- Support evidence gathering to satisfy level crossing sub-system requirements.
- Support safety assurance engineers with any acceptance and approvals, safety case evidence, and hazard close out specific to the level crossing sub-system.
- Support testing activities by providing design guidance.
Role Requirements/Competencies
Essential:
- Knowledge of and have applied Network Rail level crossing standards and typical circuits
- Knowledge of the regulation and guidance overseen by the ORR (Office of Rail & Road)
- Knowledge of and have applied Level crossing principles for MCB-CCTV, MCB-OD, AHB, MSL, and AOCL UK level crossing types
- Knowledge of and have applied CDM (Construction, Design and Management Regulations)
- Knowledge of and have applied CSM (Common Safety Method)
- Knowledge of level crossing systems, technology, lineside and control center equipment
- Knowledge of system safety considerations including system reaction times and interfaces
- Knowledge of level crossing operational risks that are required to be mitigated for the various level crossing types and how these are captured within the design
- 1.145 IRSE Engineering Managers Licence or 1.1.550 IRSE Principles Design Licence
- Knowledge of engineering interface with other disciplines (Civils, Electrification and Telecommunications)
Similar Job Searches
- Signalling Design Verifiers x 2
- Signalling Design Verifiers x 2 in York
- Signalling Design Verifiers x 2 in Yorkshire and the Humber
- Signalling Design Verifiers x 2 in England, United Kingdom
- All jobs in York
- All jobs in Yorkshire and the Humber
- All jobs in England, United Kingdom
- signalling
- Safety Manager
- Construction Manager
- Rail
- Assurance
- Engineering Manager
- Requirements Manager
- Network Rail
- Safety
- Maintenance
- Design Manager
- Programme Manager
- Signalling Design