field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

Job Title 
 
 Contractor's Engineering Manager (CEM) - Telecoms / Software-Focused Systems 
 
 Contract Details 
 
 Contract Length: Minimum 9 months 
 
 IR35 Status: Outside IR35 
 
 Start Date: ASAP 
 
 Location: Predominantly remote with occasional travel to Cheadle, Stockport 
 
 Overview 
 
 An experienced Contractor's Engineering Manager (CEM) is required to take over an existing role due to retirement. The role supports a rail-based programme currently at GRIP 6, entering SIT/SAT testing, and centres on an Online Key Management System (OKMS). 
 
 The OKMS is a software-based, cyber-secure telecoms system used by train drivers to log into operational systems. While the solution has strong software and cyber-security elements, this is not a pure software role. A telecoms engineering background is essential. Civils or signalling-only backgrounds are unlikely to be suitable. 
 
 The OKMS scope represents approximately 40-50% of the workload; however, candidates with a strong telecoms background will be able to support the role full time. 
 
 Key Responsibilities 
 CEM Role &amp; Engineering Management 
 
 Act as Contractor's Engineering Manager, coordinating all engineering activities in line with the project programme and GRIP lifecycle 
 
 Coordinate design and documentation deliverables to Network Rail 
 
 Review and sign off all documentation submitted to Network Rail from delivery partners 
 
 Manage and coordinate responses to Design Review Notes (DRNs), ensuring timely closure or document updates formally accepted by Network Rail 
 
 Coordinate As-Built documentation where required 
 
 Provide all required documentation for the Network Rail Health &amp; Safety File, agreeing formats with Network Rail 
 
 Provide IDC/IDR Certificates for GRIP stages 5, 6 and 7 (and 8 if required) 
 
 Provide Engineering Completion Certificates (ECC) 
 
 Documentation &amp; Authoring 
 
 Update and maintain the System Definition 
 
 Update the Service Interface Register (SIR) with input from DDaT stakeholders 
 
 Produce HSM performance reports to support NRAP Product Approval (templates provided) 
 
 Maintain document control via JIRA, SharePoint and OneDrive 
 
 Assurance, Safety &amp; Compliance 
 
 Coordinate with TÜV (Independent Auditor) regarding Subset compliance reports 
 
 Respond to auditor queries and provide supporting evidence as required 
 
 Ensure progress towards compliance with applicable subsets, supporting independent assurance for handover 
 
 Support completion and acceptance of SIT/SAT Safety Letter 
 
 Run checks on outstanding LDO actions prior to certification sign-off 
 
 Governance, Reporting &amp; Meetings 
 
 Attend: 
 
 Monthly Network Rail Contract Review meetings 
 
 Monthly Human Factors Working Group meetings 
 
 Chair: 
 
 Twice-weekly Engineering Delivery meetings 
 
 Monthly Security Working Group meetings, reviewing security documentation, residual risks and emerging issues 
 
 Reporting: 
 
 Provide a monthly metrics pack 
 
 Provide a monthly technical debt report 
 
 Security &amp; PSO Awareness 
 
 Maintain awareness of project security classifications, procedures and controls 
 
 Identify, manage and escalate any security breaches promptly 
 
 Support updates to security briefings and alignment with current organisational security marking systems 
 
 Consult and adhere to Network Rail security correspondence and requirements 
 
 Tools &amp; Systems 
 
 Obtain and use access to the following systems: 
 
 Network Rail eB (document control and DRN status) 
 
 Network Rail Standards Portal 
 
 Network Rail Teams 
 
 JIRA (document control and WPM) 
 
 SharePoint / OneDrive (OKMS documentation) 
 
 Project Environment 
 
 The CEM will work closely with a multi-organisation delivery team including project management, service delivery, safety assurance, systems engineering, architecture, and security specialists. 
 
 Essential Requirements 
 
 CEM Certification (mandatory) 
 
 Strong telecoms engineering background 
 
 Experience delivering software-based, cyber-secure systems within regulated environments 
 
 Proven experience working through GRIP stages, particularly GRIP 5-7 
 
 Experience with IDC/IDR, ECC, DRNs, and Network Rail governance processes 
 
 Ability to manage multiple stakeholders and suppliers 
 
 Comforta

Morson Edge

Contractors Engineering Manager (CEM)- Telecoms

Are you a Senior Commercial Manager with experience of major rail projects for a Tier 1 contractor? Do you have pre and post-contract expertise, ideally across a major programme of works? Location: Central London Hybrid: 3 days in office, 2 days from home Salary: £100,000 to £110,000 per annum (dependent on experience) About the Role We are seeking an Senior Commercial Manager or Commercial Lead to support a main contractor on a multitude of rail signalling projects. Due to the nature of the work, only candidates with experience of major rail projects for a Tier 1 contractor can be considered for this opportunity. This role is ideal for a commercially astute Commercial Manager with strong pre and post-contract experience, as well as proven ability to lead a commercial team. As a Commercial Lead, the successful candidate will take ownership of contract review, subcontractor negotiation, supplier management, and ensuring robust commercial performance across the partnership. Key Responsibilities<ul>
<li>Deliver all aspects of pre and post-contract commercial management.</li><li>Lead a commercial unit consisting of commercial managers and quantity surveyors.</li><li>Undertake contract reviews and negotiate with subcontractors and suppliers.</li><li>Oversee procurement and supply chain management.</li><li>Manage variations, valuations, and cost forecasting.</li></ul>
 Essential<ul>
<li>Experience on major rail projects for a Tier 1 contractor.</li><li>Confident in contract reviews and subcontractor negotiation.</li></ul>
 Desirable<ul>
<li>Signalling project experience</li><li>Rail partnership experience</li></ul>

Carrington West Limited

Commercial Lead

Job Introduction The Shafts (Civils) Lead is a key leadership role within the Tunnels and Shaft Delivery Unit. Responsible for overseeing the design, construction, temporary works, shaft sinking, SCL works, secondary linings for TIDs, cross passages, tunnel connections and all associated FRC works related to the shafts and headhouses stairs coordinating with the TBMs and tunnelling activities in the DU's scope. This position requires a combination of technical expertise, project management skills, and leadership abilities and supply chain management and relationships to ensure that assets are completed on time, within budget, to the highest quality standards and fully assured to the requirements of HS2. The Shafts (Civils) Lead plays a critical role in ensuring the successful delivery of the projects meeting client expectations and organizational objectives. This position requires a dynamic individual with a combination of technical expertise, leadership abilities, and a commitment to excellence. Flexible working: We welcome you to ask about the flexibility you need. This might be part-time, remote working, or compressed hours for example. Anyone who applies for a role can ask about flexibility at interview. In return, we will explore what is possible for the role. Main Responsibilities Key strengths 1.Strategic Planning: -Develop strategic plans for shaft construction projects, aligning with overall project objectives and organizational goals. -Identify opportunities for innovation and improvement in shaft construction methodologies, equipment, and processes. 1.Project Management: -Lead project teams in the planning, scheduling, and execution of shaft construction activities. -Monitor project progress, ensuring adherence to timelines, budgets, and quality standards. -Coordinate with other departments and stakeholders to resolve issues and mitigate risks. 1.Design and Engineering: -Oversee the development of shaft designs, temporary works, including structural integrity, ventilation, and access requirements. -Review engineering drawings and specifications to ensure compliance with regulatory standards and project requirements. -Collaborate with design consultants and contractors to optimize shaft designs for efficiency and safety. 1.Construction Oversight: -Supervise the construction of shafts, including excavation, lining installation, and associated works. -Implement quality control measures to ensure construction meets specifications and quality standards. -Manage contractor relationships and performance, enforcing contractual obligations as necessary. 1.Safety and Compliance: -Champion a culture of safety within the organization, promoting best practices and compliance with relevant regulations. -Conduct regular safety inspections and audits to identify hazards and implement corrective actions. -Ensure environmental compliance throughout the shaft construction process, minimizing impact on surrounding ecosystems. 1.Cost Management: -Develop and manage project budgets for shaft construction activities, tracking expenditures and controlling costs. -Identify cost-saving opportunities and efficiencies without compromising safety or quality. 1.Stakeholder Relations: -Liaise with project stakeholders, including clients, government agencies, and local communities, to address concerns and maintain positive relationships. -Communicate project progress, challenges, and milestones effectively to stakeholders, ensuring transparency and alignment of expectations. The Ideal Candidate oBachelor's degree in Civil Engineering, Mining Engineering, (advanced degree preferred) or suitable experience in field. oExtensive experience (typically 10+ years) in heavy civil engineering, tunneling and underground construction, with a focus on shafts. oProven track record of successfully managing large-scale construction projects, preferably in tunneling or heavy civil engineering. oStrong leadership and management skills, with the ability to inspire and motivate multidisciplinary teams. oExcellent communication and interpersonal abilities, with experience interacting with diverse stakeholders. oIn-depth knowledge of civils construction, tunneling techniques, equipment, and materials, as well as relevant safety and environmental regulations. oProficiency in project management tools and software for scheduling, budgeting, and reporting. This job description serves as a general outline and may vary depending on the specific requirements of the organization and the nature of the tunneling projects involved.

Head of Shafts

Job Description Job Title: IVVQ Engineer Domain: Rail / Transportation Systems Role Summary As an IVVQ Engineer, you will be responsible for system integration, verification, validation, and qualification activities to ensure solutions meet client and user requirements within the rail domain. You will work closely with cross-functional engineering teams to implement, integrate, test, and verify systems, ensuring scalability, reliability, performance, and compliance with defined engineering and project standards. Key Responsibilities Perform system integration and system testing in line with IVVQ principles and project requirements. Identify and address technical debt, performance bottlenecks, and other engineering issues. Collaborate with multidisciplinary engineering teams and stakeholders to ensure successful project delivery. Understand and adhere to project delivery processes, methodologies, and tools as defined in the GTS Management System, Engineering Management Plans, and IVVQ Management Plans. Develop, review, and improve test strategies, test plans, and test scripts. Write detailed test specifications based on system and subsystem requirements. Execute test specifications in accordance with approved test plans and project schedules, and accurately record test results. Raise, investigate, track, and verify defects through to resolution. Develop and maintain tools to support defect investigation and issue analysis. Ensure full requirements traceability and test coverage is achieved. Support Work Package Managers by providing timely status updates, accurate progress measurement, forecasting of remaining work, and identification of change, variation, risk, and opportunity. Escalate technical or delivery issues to the Senior IVVQ Engineer when required. Provide regular status and progress reports to the Senior IVVQ Engineer. Stay current with emerging IVVQ technologies, tools, and industry trends. Required Skills and Experience Experience in systems development with a strong understanding of IVVQ principles and methodologies. Experience working in an engineering environment, with an understanding of engineering delivery methodologies. Strong problem-solving and troubleshooting skills, particularly for complex systems. Understanding of configuration control and its application within engineering projects. Ability to use, develop, and maintain IVVQ tools. Excellent communication and collaboration skills, with the ability to work effectively within cross-functional teams. A proactive mindset with a passion for learning and keeping up to date with new technologies and industry developments. Essential Criteria Relevant engineering qualification (e.g. Systems, Electrical, Software, or related discipline). Professional accreditation or working towards accreditation (desirable, if applicable).

IVVQ Engineer (System Test Engineer)

Fire Extinguisher PPM Engineer Summary Working under the direction of the Duty Manager or Team Leader, the Fire Extinguisher PPM Engineer, is responsible for carrying out servicing, planned preventative maintenance (PPM) and reactive servicing on portable firefighting equipment, including fire extinguishers and fire blankets, primarily across Transport for London (TfL) premises. The role involves maintaining asset records, ensuring compliance with relevant standards such as BS5306, and advising management or clients on potential non-compliances and remedial actions. The incumbent may also assist in the design, testing, development, and installation of maintenance methods and products related to fire safety technology. This position requires adherence to quality, environmental, health and safety (QEHS) standards and company values, with a focus on delivering timely, customer-focused service while working both independently and collaboratively within a team.Please note the succcessful candidate will need a driving licence. You will be working on various central London train stations, so will need to be in Central London for a 6am start. Also night shifts will be available from 10apm to 6am. An advantage would be to have access to a small van, but not essnetial. Previous expericence servicing Fire extinguishers, is essential for this role.Rate - £200 per day umbrella - PAYE is a option. Hours - Monday to Friday 6am - 14.00 pm. Duration - 12 weeks, maybe longer. Location - Various central London underground stations. Key Responsibilities • Perform PPM and reactive maintenance on portable firefighting equipment in line with BS5306 standards. • Maintain accurate asset records and documentation. • Assist in the development and implementation of new maintenance and installation methods. • Complete technical and regulatory documentation as required. • Identify and report potential non-compliances and recommend remedial works. • Comply with QEHS policies and company behavioural standards. • Contribute to continuous personal and professional development. • Support quality control testing and product/system development activities as needed.Skills • Servicing and maintenance of portable fire extinguishers (minimum 4 days training). • Knowledge of BS5306 parts 3, 8, 9, and 10 standards. • Competent verbal and written communication skills. • Ability to work independently and as part of a team. • Customer-focused with strong stakeholder management skills. • Competent analytical and problem-solving abilities. • Computer literate, proficient in MS Office (Word, Excel). • Full UK driving licence. • Awareness of quality standards and regulatory requirements relevant to fire safety. • Ability to follow prescribed guidelines and work to deadlines. Software/Tools • Microsoft Office Suite (Word, Excel) • Asset management and maintenance recording systems (as applicable) Certifications &amp; Standards • Portable Fire Extinguisher Servicing and Maintenance Training (minimum 4 days) • TFL Access Permits (desirable) • Familiarity with BS5306 standards (parts &lt;phone number removed&gt; ) • Awareness of BIM processes for Integrated Project Delivery (desirable)

5 Performance Manager Jobs