field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

Job Title 
 
 Contractor's Engineering Manager (CEM) - Telecoms / Software-Focused Systems 
 
 Contract Details 
 
 Contract Length: Minimum 9 months 
 
 IR35 Status: Outside IR35 
 
 Start Date: ASAP 
 
 Location: Predominantly remote with occasional travel to Cheadle, Stockport 
 
 Overview 
 
 An experienced Contractor's Engineering Manager (CEM) is required to take over an existing role due to retirement. The role supports a rail-based programme currently at GRIP 6, entering SIT/SAT testing, and centres on an Online Key Management System (OKMS). 
 
 The OKMS is a software-based, cyber-secure telecoms system used by train drivers to log into operational systems. While the solution has strong software and cyber-security elements, this is not a pure software role. A telecoms engineering background is essential. Civils or signalling-only backgrounds are unlikely to be suitable. 
 
 The OKMS scope represents approximately 40-50% of the workload; however, candidates with a strong telecoms background will be able to support the role full time. 
 
 Key Responsibilities 
 CEM Role &amp; Engineering Management 
 
 Act as Contractor's Engineering Manager, coordinating all engineering activities in line with the project programme and GRIP lifecycle 
 
 Coordinate design and documentation deliverables to Network Rail 
 
 Review and sign off all documentation submitted to Network Rail from delivery partners 
 
 Manage and coordinate responses to Design Review Notes (DRNs), ensuring timely closure or document updates formally accepted by Network Rail 
 
 Coordinate As-Built documentation where required 
 
 Provide all required documentation for the Network Rail Health &amp; Safety File, agreeing formats with Network Rail 
 
 Provide IDC/IDR Certificates for GRIP stages 5, 6 and 7 (and 8 if required) 
 
 Provide Engineering Completion Certificates (ECC) 
 
 Documentation &amp; Authoring 
 
 Update and maintain the System Definition 
 
 Update the Service Interface Register (SIR) with input from DDaT stakeholders 
 
 Produce HSM performance reports to support NRAP Product Approval (templates provided) 
 
 Maintain document control via JIRA, SharePoint and OneDrive 
 
 Assurance, Safety &amp; Compliance 
 
 Coordinate with TÜV (Independent Auditor) regarding Subset compliance reports 
 
 Respond to auditor queries and provide supporting evidence as required 
 
 Ensure progress towards compliance with applicable subsets, supporting independent assurance for handover 
 
 Support completion and acceptance of SIT/SAT Safety Letter 
 
 Run checks on outstanding LDO actions prior to certification sign-off 
 
 Governance, Reporting &amp; Meetings 
 
 Attend: 
 
 Monthly Network Rail Contract Review meetings 
 
 Monthly Human Factors Working Group meetings 
 
 Chair: 
 
 Twice-weekly Engineering Delivery meetings 
 
 Monthly Security Working Group meetings, reviewing security documentation, residual risks and emerging issues 
 
 Reporting: 
 
 Provide a monthly metrics pack 
 
 Provide a monthly technical debt report 
 
 Security &amp; PSO Awareness 
 
 Maintain awareness of project security classifications, procedures and controls 
 
 Identify, manage and escalate any security breaches promptly 
 
 Support updates to security briefings and alignment with current organisational security marking systems 
 
 Consult and adhere to Network Rail security correspondence and requirements 
 
 Tools &amp; Systems 
 
 Obtain and use access to the following systems: 
 
 Network Rail eB (document control and DRN status) 
 
 Network Rail Standards Portal 
 
 Network Rail Teams 
 
 JIRA (document control and WPM) 
 
 SharePoint / OneDrive (OKMS documentation) 
 
 Project Environment 
 
 The CEM will work closely with a multi-organisation delivery team including project management, service delivery, safety assurance, systems engineering, architecture, and security specialists. 
 
 Essential Requirements 
 
 CEM Certification (mandatory) 
 
 Strong telecoms engineering background 
 
 Experience delivering software-based, cyber-secure systems within regulated environments 
 
 Proven experience working through GRIP stages, particularly GRIP 5-7 
 
 Experience with IDC/IDR, ECC, DRNs, and Network Rail governance processes 
 
 Ability to manage multiple stakeholders and suppliers 
 
 Comforta

Morson Edge

Contractors Engineering Manager (CEM)- Telecoms

<h3>Site Manager - London Underground electrical / station projects / Nights</h3><h3>Rate: £275 per shift CIS Location: Zones 1-3, TFL Underground Shifts: Sun-Thurs, 23:45-04:45 (weekends at enhanced rates) Start: ASAP | Duration: Ongoing until end of 2026</h3> The Role Lead a full station fit-out on the London Underground. Manage operatives, oversee SPCs, and ensure smooth delivery of electrical and telecoms asset installations.Van provided (license check required). What You'll Do Manage the Install of CMS (trunking, tray, conduit) Manage the Terminating &amp; test CAT6A &amp; Fibre cabling Manage the Install &amp; terminating of antennas and equipment Must-Have SMSTS Sentinel Card (LU- ICI/WSSI) DBS, JIB Card, Asbestos Awareness Face Fit (proof or undertaken)Bonus: First Aid, PASMA, QUAF, LUL Level 3Experience: Must have previous TFL/Underground projects site management experience + strong electrical background and ideally telecoms installation knowledge.Contact Sam Mayo at Advance TRS for more information or to apply to &lt;email address removed&gt;We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Advance TRS Ltd

Site Manager (Nights LU)

Site Manager – Rail &amp; Infrastructure
Location: Stansted (with regular travel across the Anglia route)
Salary: £50,000 - £55,000 + Benefits
Contract Type: Permanent
Are you an experienced Site Manager with a strong background in rail, construction, and reactive maintenance? This is a fantastic opportunity to join a leading contractor delivering essential works across the Anglia route.
 
The Role
As Site Manager, you’ll take ownership of reactive and planned maintenance works, ensuring projects are delivered safely, on time, and within budget. You’ll manage teams, subcontractors, and stakeholders while driving high standards in health, safety, quality, and compliance.
 
Key Responsibilities
Lead and coordinate reactive and PPM works across rail and infrastructure projects.
Ensure compliance with HSQE standards and industry regulations.
Manage supervisors, operatives, and subcontractors effectively.
Liaise with clients and stakeholders to maintain strong relationships.
Monitor KPIs, progress, and implement continuous improvement.
Produce programmes, reports, and maintain accurate project records.
 
Skills &amp; Experience
Minimum 5 years’ experience in site management within rail or construction.
Strong leadership, communication, and organisational skills.
Proven ability to manage safety and quality performance.
Knowledge of rail standards, construction trades, and codes of practice.
Commercial awareness and computer literacy.
 
Essential Qualifications
CSCS for Managers, SMSTS, First Aid at Work, CDM Awareness.
Full UK Driving Licence.
 
Desirable
Degree/Diploma in a construction-related subject.
Rail-specific training and Personal Track Safety.
 
What’s on Offer
Salary £50,000 - £55,000 plus benefits package.
26 days annual leave plus additional company days.
Pension scheme.
Unlimited learning and development opportunities.
 
How to Apply:
Call &lt;phone number removed&gt; or email your details to &lt;email address removed&gt;
 
Ganymede Solutions specialises in recruitment across Manufacturing, Infrastructure, Civil, Transportation, and General Engineering sectors for both permanent and contract roles.
For more opportunities, visit our website.
By applying, you accept the terms of our Privacy Notice, available on our website.

3 Site Manager Jobs in United Kingdom